Billion Electric Company BiPAC 7402R2 User Manual download pdf (Page 37)

BiPAC 7402R2 ADSL2+ VPN Firewall Router

Chapter 4: Configuration

Ethernet

Primary IP Address

IP Address: The default IP on this router.

SubNetmask: The default subnet mask on this router.

RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.

IP Alias

This function supports to create multiple virtual IP interfaces on this router. It helps to connect two or

more local networks to the ISP or remote node. In this case, an internal router is not required.

IP Address: Specify an IP address on this virtual interface.

SubNetmask: Specify a subnet mask on this virtual interface.

Security Interface: Specify the firewall setting on this virtual interface.

Internal: The network is behind NAT. All traffic will do network address translation when sending out to

Internet if NAT is enabled.

External: There is no NAT on this IP interface and connected to the Internet directly. Mostly it will be

used when providing multiple public IP addresses by ISP. In this case, you can use public IP address in

local network which gateway IP address point to the IP address on this interface.

DMZ: Specify this network to DMZ area. There is no NAT on this interface.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 135 136

No comments

Billion Electric Company BiPAC 7402R2 User Manual Page 37