Billion Electric Company BiPAC 7402R2 User Manual download pdf (Page 76)

BiPAC 7402R2 ADSL2+ VPN Firewall Router

Chapter 4: Configuration

Active as default route: Enables the default route.

Click Apply button to apply your changes.

PPTP Connection - LAN to LAN

Connection Name: A user-define description of the connection.

Type: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server,

e.g. your office server), check Dial In operates as a VPN server.

 When configuring your router as a Client, enter the remote Server IP Address (or Hostname) you

wish to connection to.

 When configuring your router as a server, enter the Private IP Address Assigned to Dial in User

address.

Peer Network IP: Enter Peer network IP address.

Netmask: Enter the subnet mask of peer network based on the Peer Network IP setting.

Username: If you are a Dial-Out user (client), enter the username provided by your Host. If you are a

Dial-In user (server), enter your own username.

Password: If you are a Dial-Out user (client), enter the password provided by the your Host. If you are a

Dial-In user (server), enter your own password.

PPP Authentication Type: Default is Auto if you want the router to determine the authentication type to

use, or else manually specify CHAP (Challenge Handshake Authentication Protocol) or PAP (Password

Authentication Protocol) if you know which type the server is using (when acting as a client), or else the

authentication type you want clients connecting to you to use (when acting as a server). When using

PAP, the password is sent unencrypted, whilst CHAP encrypts the password before sending, and also

allows for challenges at different periods to ensure that the client has not been replaced by an intruder.

Data Encryption: Data sent over the VPN connection can be encrypted by an MPPE algorithm. Default

is Auto, so that this setting is negotiated when establishing a connection, or else you can manually

Enable or Disable encryption.

Key Length: The data can be encrypted by MPPE algorithm with 40 bits or 128 bits. Default is Auto, it

is negotiated when establishing a connection. 128 bit keys provide stronger encryption than 40 bit keys.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 135 136

No comments

Billion Electric Company BiPAC 7402R2 User Manual Page 76