Billion Electric Company BiPAC 7402VL User Manual download pdf (Page 18)

VoIP/(802.11g) ADSL2+ Router

Chapter 3: Basic Installation

Factory Default Settings

Before configuring your, you need to know the following default settings.

Web Interface (Username and Password)

Username: admin

Password: admin

The default username and password are “admin” and “admin” respectively.

ttention

If you ever forget the password to log in, you may press the RESET button up to

6 seconds to restore the factory default settings.

LAN Device IP Settings

IP Address: 192.168.1.254

Subnet Mask: 255.255.255.0

ISP setting in WAN site

PPPoE

DHCP server

DHCP server is enabled.

Start IP Address: 192.168.1.100

IP pool counts: 100

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

LAN Port WAN Port

IP address

192.168.1.254

Subnet Mask

255.255.255.0

DHCP server function

Enabled

IP addresses for

distribution to PCs

100 IP addresses continuing from

192.168.1.100 through 192.168.1.199

The PPPoE function is enabled

to automatically get the WAN

port configuration from the ISP,

but you have to set the

username and password first.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 119 120

No comments

Billion Electric Company BiPAC 7402VL User Manual Page 18